Circular pick-up electromagnets IMAVEM-30
Warning: Last items in stock!
Availability date: 02/02/2016
|Market factor||ED 100 %|
|Nominal voltage||24 V dc|
The attraction and holding of ferromagnetic objects is effected by passing an electric current through the coil of the electromagnet. When the power current is disconnected, the object held is released. When working with suspended loads safety standards must be respected.
Degree of protection IP65
Thermal Class B (130)
Rated voltage 24V DC
Normalised Duty cycle: ED 100%. For other voltages, ED or sizes, please consult us.
Such electromagnets must be activated only in contact with the metal object to be held.
They are intended for intensive operation without limit of movements and in permanent service. Their main benefit is a strong holding force with moderate power consumption.
Coils standardized 24 V = ED. 100% continuous operation.
Standard terminals included free-of-charge, for all sizes.
Supply possibilities on request:
The connector has 4 options for its positioning (4 × 90º) and is suitable for alternating current (AC) voltage.
The following table gives the holding force values (Fm) according to the air gap (.DELTA.L) and measured under the following conditions:
Under any other conditions, the magnetic force (Fm) may decrease.
|Code||P a 20ºC (W)||e (mm)||Entrehierro (mm) ?L|
|0||0.1||0.2||0.5||1||Fuerzas magnéticas de mantenimiento Fm (N)|
e (mm): thickness of the piece to hold Standard sizes:
Example: IMAVEM 65-24Vdc-ED100
Exemplo: IMAVEM65 / C-24VDC-ED100
Exemplo: IMAVEM50 / B-24VDC-ED100%
|Code||Electromagnet weight (Kg)||ØA (-0.3) (mm)||B||C (±0.1) (mm)||D (mm)||E (mm)||F (mm)|
Important: the clamp screw must not exceed the dimension D.
* On request, can be manufactured to any size, voltage, duty cycle, etc.
CE-products meet the standards for low voltage 73/23. Compliance to EMC 89/366 EEC should be ensured by the user.
When used for lifting and handling of loads a minimum safety factor of 3 should be used, the weight of the load must be at least one third of the holding force.
Fields of application:
These electromagnets are used, among other applications, to handle and manipulate ferromagnetic objects in industrial robotics, for positioning of parts, for maintaining fire doors, ventilation and general safety.