Rectangular electromagnets IMAREC 150/35, Electromagnets for Sale

IMAREC150/35

Sosical sharing

ELEE00029

New product

Rectangular electromagnets IMAREC 150/35

In Stock

Volume discounts

QuantityPriceYou Save

114,00 €/ud

Data sheet

Market factorED 100 %
Weight (g)100
Nominal voltage24 V dc

Features:

Degree of protection: IP65
Insulation class: B (130)
Rated voltage: 24V DC
Duty cycle factor up: ED 100%
Other voltages, ED and sizes: Consult

Attracting and holding the ferromagnetic parts is obtained by an elctric current through the magnet. When the electrical supply ceases the piece is released. When working with suspended loads safety standards must be respected.

Connecting to alternating current (AC) only for sizes IMAREC150 / 60 to IMAREC500 / 60.

The electrical connection is made via a connector on the end of the electromagnet (1). The connector has two orientation possibilities (2 x 180) for IMAREC sizes 100/35 to 600/35 and four IMAREC sizes 150/60 to 500/60 IMAREC (4x90).

The underside of the device has threaded holes (M-6 / M-8) for fixing.

The following table gives the values of a holding force (Hf) as a function of the air gap (δL) measured under the following conditions:

     Dc supply (DC).
     Flat piece ( roughness) in AºSt37, the thickness indicated in the table and dimensions less than the attraction face.
     Environmental temperature: of 35 ° C.
     Coil stabilized at its working temperature.

For other conditions, the magnetic force (Fm) may decrease.

CodeP a 20ºC (W)e (mm)Air gap(mm) ?LMagnetic holding forces Hf (N)
00.10.20.51
IMAREC150/351416550302114
37695802208217
610906573689021
10145090449011635

e (mm): thickness of the piece to hold Standard sizes: Plano ERM

CodeA (mm)B (mm)CD (mm)E (mm)F (mm)HWeight (kg)Press-
(mm)holestow
IMAREC 150/3517535±0.334±0.1255010M631PG-9

 Remarks:

The magnetic remanence after turning off the electric current is approximately 5% of the holding force.

Grounding is recommended if the metallic parts are accessible.

Ordering code:
size; tension; Load factor
Example: Ref .: IMAREC150 / 35 24 Vdc 100%

EC The products conform to the standards of low voltage 73/23. Compliance with the standards for electromagnetic compatibility 89/366 EEC should be secured by the user.

When used for lifting and handling of loads a minimum safety factor of 3 must be choosen, the weight of the load must be at least one third of the holding force.

Fields of application:

This type of electromagnets are used in industrial robotics for positioning pieces, transport facilities, etc ...

3D View
Clicking on the image , hold and turn.
















Related Products

Rectangular electromagnets IMAREC100/35

In Stock

Rectangular electromagnets IMAREC 200/35

In Stock

Rectangular electromagnets IMAREC 400/35

In Stock

Rectangular electromagnets IMAREC 500/35

In Stock

Rectangular electromagnets IMAREC 600/35

This product is no longer in stock

Add to cart

Rectangular electromagnets IMAREC 150/60

This product is no longer in stock

Add to cart

Rectangular electromagnets IMAREC 200/60

In Stock

Rectangular electromagnets IMAREC 500/60

In Stock