Sale!
IMAREC200/35

Rectangular electromagnets IMAREC 200/35, Electromagnets for Sale

IMAREC200/35

Sosical sharing

ELEE00030

New product

Rectangular electromagnets IMAREC 200/35

In Stock

Volume discounts

Quantity Price You Save

101,65 €/ud

Data sheet

Market factor ED 100 %
Weight (g) 150
Nominal voltage 24 V dc

These are activated by 24V direct current and are manufactured in iron alloys. Alternating current ones can also be made to order. They are used in industrial robotics for positioning pieces and in transport facilities, among other applications. The products meet the 73/23 EEC low voltage regulations; compliance with the 89/366 EEC electromagnetic compatibility regulations must be ensured by the user.

Features:

Degree of protection: IP65
Insulation class: B (130)
Rated voltage: 24V DC
Duty cycle factor up: ED 100%
Other voltages, ED and sizes: Consult

Attracting and holding the ferromagnetic parts is obtained by an elctric current through the magnet. When the electrical supply ceases the piece is released. When working with suspended loads safety standards must be respected.

Connecting to alternating current (AC) only for sizes IMAREC150 / 60 to IMAREC500 / 60.

The electrical connection is made via a connector on the end of the electromagnet (1). The connector has two orientation possibilities (2 x 180) for IMAREC sizes 100/35 to 600/35 and four IMAREC sizes 150/60 to 500/60 IMAREC (4x90).

The underside of the device has threaded holes (M-6 / M-8) for fixing.

The following table gives the values of a holding force (Hf) as a function of the air gap (δL) measured under the following conditions:

     Dc supply (DC).
     Flat piece ( roughness) in AºSt37, the thickness indicated in the table and dimensions less than the attraction face.
     Environmental temperature: of 35 ° C.
     Coil stabilized at its working temperature.

For other conditions, the magnetic force (Fm) may decrease.

Code P a 20ºC (W)
e (mm) Air gap(mm) δL

Magnetic holding

forces Hf (N)

0 0.1 0.2 0.5 1
IMAREC100/35 10 1 32 22 12 8 6
3 396 308 120 45 8
6 604 320 190 52 12
10 752 468 238 60 18
IMAREC150/35 14 1 65 50 30 21 14
3 769 580 220 82 17
6 1090 657 368 90 21
10 1450 904 490 116 35
IMAREC200/35 18 1 80 60 42 28 14
3 928 720 260 94 20
6 1400 810 460 121 27
10 1758 1108 690 136 46
IMAREC400/35 30 1 172 131 91 60 35
3 2100 1460 537 210 45
6 3060 1722 962 263 60
10 3810 2371 1297 304 93
IMAREC500/35 45 1 210 150 100 60 36
3 2323 1806 674 234 56
6 3540 2100 1114 295 70
10 4423 2745 1501 330 117
IMAREC600/35 53 1 226 173 90 66 40
3 2653 2053 706 266 66
6 4053 2266 1286 346 80
10 5026 3120 1806 400 120
IMAREC150/60 25 1 140 112 102 75 50
3 780 680 600 445 200
6 1800 1490 1100 610 200
10 1900 1500 1250 650 210
IMAREC200/60 40 1 205 165 155 116 72
3 1130 990 890 680 290
6 2750 2300 1800 884 280
10 2760 2160 1870 900 300
IMAREC500/60 75 1 553 440 397 310 190
3 3150 2630 2320 1800 78
6 7250 5870 4650 2380 850
10 7450 5950 4820 2410 910

e (mm): thickness of the piece to hold

Standard sizes:

Plano ERM

Code A (mm) B (mm) C
(mm)
D (mm) E (mm) F (mm) H
holes
Weight (kg) Press-
tow
IMAREC 100/35 125 35±0.3 34±0.1 25 50 10 M6 2 0.9 PG-9
IMAREC 150/35 175 35±0.3 34±0.1 25 50 10 M6 3 1
IMAREC 200/35 225 35±0.3 34±0.1 25 50 10 M6 4 1.5
IMAREC 400/35 425 35±0.3 34±0.1 25 50 12 M6 8 2.8
IMAREC 500/35 525 35±0.3 34±0.1 25 50 12 M6 10 3.5
IMAREC 600/35 625 35±0.3 34±0.1 25 50 12 M6 12 4.5
IMAREC 150/60 180 60±1 49.5±0.2 40 70 12 M8 2 2.3 PG-11
IMAREC 200/60 230 60±1 49.5±0.2 40 120 12 M8 2 3
IMAREC 500/60 530 60±1 49.5±0.2 70 120 12 M8 4 7.8


Remarks:

The magnetic remanence after turning off the electric current is approximately 5% of the holding force.

Grounding is recommended if the metallic parts are accessible.

Ordering code:
size; tension; Load factor
Example: Ref .: IMAREC150 / 35 24 Vdc 100%

EC The products conform to the standards of low voltage 73/23. Compliance with the standards for electromagnetic compatibility 89/366 EEC should be secured by the user.

When used for lifting and handling of loads a minimum safety factor of 3 must be choosen, the weight of the load must be at least one third of the holding force.

Fields of application:

This type of electromagnets are used in industrial robotics for positioning pieces, transport facilities, etc ...

3D View

Clicking on the image , hold and turn.















Related Products

Add to cart

Rectangular electromagnets IMAREC100/35

Add to cart

Rectangular electromagnets IMAREC 150/35

Add to cart

Rectangular electromagnets IMAREC 400/35

Add to cart

Rectangular electromagnets IMAREC 500/35

Add to cart

Rectangular electromagnets IMAREC 600/35

Add to cart

Rectangular electromagnets IMAREC 150/60

Add to cart

Rectangular electromagnets IMAREC 200/60

Add to cart

Rectangular electromagnets IMAREC 500/60