The magnetic elevator IMA500 is a magnetic lift made by Neodymium magnets with great force. They work without the need to use a source of electrical energy. To activate it, it is sufficient to turn the lever to the right side approximately 100 degrees.

Format:

The IMA500 magnetic elevators are very practical and efficient, allowing the manipulation of different parts with different surfaces. They have a safety lever that protects from demagnetization by mistake. Thanks to the low weight of the elevator, it can be introduced in different systems such as cranes.

Features:

They are SAFE: Safety coefficient of 3 and lever with safety lock.

They are POWERFUL: Great capacity, even with large air gaps.

They are very LIGHT: Force of detachment of 80 to 115 times its weight.

Very COMFORTABLE TO USE: They magnetize and demagnetize with one hand.

They are EASY TO MAINTAIN: Possibility to rectify the magnetic contact poles regularly.

Measurements:

Contact surface: Elements such as rust, paint, oils or a rough surface, generate an air gap and reduce strength.

Thickness: When the material to be transported does not have a minimum thickness, the force of attraction is reduced considerably.

Length and width: If we increase the length or width of the material to be manipulated, the ends can be curved and the surface can no longer be flat, a factor that produces an air gap between the magnetic system and the part. Usually it happens with thin thicknesses

Material: Steels with low carbon content are good conductors of magnetism, however, steels with a high percentage of carbon lose magnetic properties, reducing the strength of the elevator.